| Customization: | Available |
|---|---|
| Type: | Saw |
| Application: | Orthopedic |
|
Still deciding? Get samples of US$ 2200/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Name | Photo | Unit | Price | ||
| 1 | Handpiece M-14-1 |
/ | SET | USD420 | ||
| I. Features of handpiece 1. Handpiece maximum speed: 14000rpm, stepless speed. Positive and negative direction Rotation for choosing and it runs stably. 2. The handpiece can install 7 connectors, they are high torque drilling interface, self-stopping craniotomy drilling interface, fast-drilling interface, cannulated drilling interface, oscillating saw interface, reciprocating saw interface, craniotomy milling interface, 3. Battery voltageL14.4V; free from sterilizing; two batteries; 4. The whole body can be sterilized. |
||||||
| 2 | High torque drilling Chuck M-14-2 |
/ | PC | USD205 | ||
| I. Features of high torque drilling interface Fastest speed: 250rpm. |
||||||
| 3 |
Self-stopping craniotomy drilling Chuck M-14-3 |
/ | PC | USD300 |
||
| Features of self-stopping craniotomy drilling The Max. speed: 1200 RPM, has the function of self-stopping after piercing craniotomy to ensure safety in operation. It is also suitable for neurosurgical operation. |
||||||
| 4 | Fast drilling Chuck M-14-4 |
/ | PC | USD205 | ||
| Features of fast drilling interface Maximum speed: 1200rpm. |
||||||
| 5 | Craniotomy milling Chuck M-14-5 |
/ | PC | USD340 | ||
| Features of Craniotomy milling interface 1. Milling head drilling speed: 30000rpm 2. Continuously Variable Transmission, Stable Running 3. 4 pieces of mills for free |
||||||
| 6 | Cannulated drilling Chuck M-14-6 |
/ | PC | USD300 | ||
| Features of cannulding drilling interface 1. Max. rotating speed: 1200rpm 2. Max. hollow diameter:4.5mm 3. Suitable for K-wire and interlocking nails operation. |
||||||
| 7 | Reciprocating Saw Chuck M-14-7 |
/ | PC | USD300 | ||
| Features of Reciprocating Saw Interface 1. Reciprocating Frequency Of 14000 times/Minute. 2. Reciprocating Amplitude 2.5mm-5mm, 3. 5 saw blade for free |
||||||
| 8 | Oscillating Saw Chuck M-14-8 |
/ | PC | USD220 | ||
| Features of Oscillating Saw Interface 1. Oscillating Frequency:14000 Times / min 2. Oscillating amplitude: 50 degrees, 3. Saw Blades: 1.0*24*90mm,1.0*24*110mm, 1.2*24*90mm, 1.2*24*110mm, and 1.2*20*120mm, one piece each size. |
||||||
){kind=link}